Description
Butt welding ASME B16.9Titanium Gr2 Tee
| Shape | Equal Tee (T/S), Reducing Tee (T/R) |
| Size | NPS1/2″-24″ (DN15-1200) Schedule 10s to Schedule 80 |
| Standard | ANSI B16.9, MSS SP 43, EN1092-1 |
| Material | GR2 GR7 GR12 etc. |
| Wall thickness | SCH10S, SCH10, SCH40S,STD, SCH20,SCH30,SCH40, SCH60, SCH80, |
| End | bevel end,plain end |
| Surface | Sand blasting, Polishing, Pickling |
| Package | Wood case or Wooden pallets or according to the customer’s requirements. |
| Certificate | ISO 9001 MTC EN10204.3.1 |
| Payment term | T/T, L/C, Western Union etc. |
| Tee type | Equal tee, reducing tee, positive tee, inclined tee, threaded tee, clip tee, socket tee |
| Test | Third party inspection: acceptable |
| Marking | All products are marked by laser after they are finished |
| Application | Chemical, Petroleum, Machinery, Industry, etc |
Classified according to the butt joint form:
1. Butt-welded tee: It is welded after connecting with the connecting pipe.
2. Socket type tee: After the connecting pipe fittings are inserted into the ends of the tee, they are welded or welded.
3. Card sleeve tee: Each end is a ferrule joint, and the tube is inserted and then fastened.
4, threaded tee: threaded connection of pipe fittings.
Titanium tee features
Excellent corrosion resistance in many media.
Low density, high strength and low weight.
The surface is smooth and free of dirt, and the fouling coefficient is greatly reduced.
Chemical requirements
| N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti | |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | balance |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12-0.25 | / | / | balance |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.0-3.0 | 2.0-3.0 | / | / | / | balance |
Tensile requirements
| Grade | Tensile strength(min) | Tensile strength(min) | Yeild strength(min) | Yeild strength(min) | Elongation |
| / | Ksi | Mpa | Ksi | Mpa | % |
| Gr2 | 50 | 345 | 40 | 275 | 20 |
| Gr7 | 50 | 345 | 40 | 275 | 20 |
| Gr12 | 90 | 620 | 70 | 438 | 15 |
Titanium Pipe Fittings Features:
1) Strictly implements the technical specification of ASME B16.9, ASTM B363 etc.
2) Titanium Elbows (45D, 90D, 180D) NPS 1/4″ – 24″
3) Titanium Reducers (concentric, eccentric) NPS 1/4″ – 24″
4) Titanium Tees (equal, reducing) NPS 1/4″ – 4″
5) Titanium Stub ends NPS1/4″ – 4″
6) Titanium flange,reducer,caps,valves available.
7) Feature:Low density, high specific strength, high corrosion resistance and good thermal stability.
8) Quality and test: Strick test is indispensable, we must insure our clients’ demands.
