Description
| Type | titanium pipe cap |
| Size | Seamless 1/2″ To 48″ Welded To 72″ |
| Wall thickness | Sch5S-Sch160, XS,XXS |
| Standards | ASME B16.9, ASTM B363 |
| Material | Gr2,Gr7,Gr12 |
| Surface treatment | Black painting,anti-rust varnish,anti-rust oil,hot galvanized,3PE coating, epoxy coating. |
| Packing | wooden case, pallet or as customers’ requirement |
| Applications | Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc. |
| Min order | 50 piece |
| Delivery time | 7 after receipt of advanced payment for titanium pipe cap |
| Certificate | API, CCS,and ISO9001:2000 |
| Productivity | 150000 ton per year for titanium pipe cap |
| Packing: | Plastic and paper inside,fixed between wooden pallets. |
Chemical requirements
| N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti | |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | balance |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12-0.25 | / | / | balance |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.0-3.0 | 2.0-3.0 | / | / | / | balance |
Tensile requirements
| Grade | Tensile strength(min) | Tensile strength(min) | Yeild strength(min) | Yeild strength(min) | Elongation |
| / | Ksi | Mpa | Ksi | Mpa | % |
| Gr2 | 50 | 345 | 40 | 275 | 20 |
| Gr7 | 50 | 345 | 40 | 275 | 20 |
| Gr12 | 90 | 620 | 70 | 438 | 15 |
| Nominal Pipe
Size |
Length | Limiting Wall
Thickness for Length E |
Nominal Pipe
Size |
Length | Limiting Wall
Thickness for Length E |
||||
| DN | NPS | E | E1 | 3.73 | DN | NPS | E | E1 | 3.73 |
| 15 | 1/2 | 25 | 25 | 3.91 | 450 | 18 | 203 | 229 | 12.7 |
| 20 | 3/4 | 25 | 25 | 4.55 | 500 | 20 | 229 | 254 | 12.7 |
| 25 | 1 | 38 | 38 | 4.85 | 550 | 22 | 254 | 254 | 12.7 |
| 32 | 1-1/4 | 38 | 38 | 5.08 | 600 | 24 | 267 | 305 | 12.7 |
| 40 | 1-1/2 | 38 | 38 | 5.54 | 650 | 26 | 267 | ||
| 50 | 2 | 38 | 44 | 7.01 | 700 | 28 | 267 | ||
| 65 | 2-1/2 | 38 | 51 | 7.62 | 750 | 30 | 267 | ||
| 80 | 3 | 51 | 64 | 8.08 | 800 | 32 | 267 | ||
| 90 | 3-1/2 | 64 | 76 | 8.56 | 850 | 34 | 267 | ||
| 100 | 4 | 76 | 76 | 9.53 | 900 | 36 | 267 | ||
| 125 | 5 | 76 | 89 | 10.97 | 950 | 38 | 305 | ||
| 150 | 6 | 89 | 102 | 12.7 | 1000 | 40 | 305 | ||
| 200 | 8 | 102 | 127 | 12.7 | 1050 | 42 | 305 | ||
| 250 | 10 | 127 | 152 | 12.7 | 1100 | 44 | 343 | ||
| 300 | 12 | 152 | 178 | 12.7 | 1150 | 46 | 343 | ||
| 350 | 14 | 165 | 191 | 12.7 | 1200 | 48 | 343 | ||
| 400 | 16 | 178 | 203 | 12.7 | |||||
| Length E applies for the thickness not exceeding the limiting Wall Thickness
Length E1 applies for the thickness exceeding the Limiting Wall Thickness The form for the cap is normatively elliptic. The length of half elliptic shall not be less than 1/4 inside diameter of cap. Wall thickness :Sch5-Sch160 xxs |
|||||||||
Titanium Pipe Fittings Features:
1) Strictly implements the technical specification of ASME B16.9, ASTM B363 etc.
2) Titanium Elbows (45D, 90D, 180D) NPS 1/4″ – 24″
3) Titanium Reducers (concentric, eccentric) NPS 1/4″ – 24″
4) Titanium Tees (equal, reducing) NPS 1/4″ – 4″
5) Titanium Stub ends NPS1/4″ – 4″
6) Titanium flange,reducer,caps,valves available.
7) Feature:Low density, high specific strength, high corrosion resistance and good thermal stability.
8) Quality and test: Strick test is indispensable, we must insure our clients’ demands.
