Description
Butt Welded Titanium Eccentric Reducer
Material: Gr2, Gr7, Gr12
Specifications: Outer diameter DN15-1200, NPS 1/2″-48″
Wall thickness: Sch10s-Sch160
Standard ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B
Technique: Welded, Forged, Rolled, Seamless
Surface finished: Sand blasting, Polishing, Pickling
Quality control: 100% of the X-ray detection (RT), 100% of Surface penetrant inspection (PT)
Application: Petroleum, Chemical Industry, Chloralkali, Metallurgy, Carbonization, Refrigeration, Light Industry, Salt Industry, Electric Power, etc.
Packing: Plywood Pallets/ Wooden Case Or As Per Your Specification.
Marks and stamp: As per client’s request. All products are marked by laser after they are finished
Certificate: TUV,SGS, ISO9001
Material Test Report: EN10204.3.1
Chemical requirements
| N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti | |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | balance |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12-0.25 | / | / | balance |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.0-3.0 | 2.0-3.0 | / | / | / | balance |
Tensile requirements
| Grade | Tensile strength(min) | Tensile strength(min) | Yeild strength(min) | Yeild strength(min) | Elongation |
| / | Ksi | Mpa | Ksi | Mpa | % |
| Gr2 | 50 | 345 | 40 | 275 | 20 |
| Gr7 | 50 | 345 | 40 | 275 | 20 |
| Gr12 | 90 | 620 | 70 | 438 | 15 |
Titanium Pipe Fittings Features:
1) Strictly implements the technical specification of ASME B16.9, ASTM B363 etc.
2) Titanium Elbows (45D, 90D, 180D) NPS 1/4″ – 24″
3) Titanium Reducers (concentric, eccentric) NPS 1/4″ – 24″
4) Titanium Tees (equal, reducing) NPS 1/4″ – 4″
5) Titanium Stub ends NPS1/4″ – 4″
6) Titanium flange,reducer,caps,valves available.
7) Feature:Low density, high specific strength, high corrosion resistance and good thermal stability.
8) Quality and test: Strick test is indispensable, we must insure our clients’ demands.
